差壓傳訊器

High-accuracy differential pressure measurement.

型號 : EMIS BAR

數量 :

The transmitter principle of operation is to measure pressure difference between positive and negative sensor cavities. The device can measure the flow using reducers. Reducer creates the obstacle for the liquid or gas flow. While passing through this section, the flow changes its nature. Negative pressure transmitter measures the difference of pressure before and after the reducer. The bigger the difference is, the higher the flow rate is in the pipe.

Differential Pressure Transmitter EMIS-BAR modifications:

143 Traditional-mount;
153 Traditional-mount High Static Differential Pressure transmitter;
183 with Remote Diaphragm seal;
184 with Remote Extended Diaphragm Seal;
185 with one Remote Diaphragm seal and one Remote Extended Diaphragm Seal;
193 Traditional-mount Micro Differential Pressure transmitter.

Parameter	Description
Medium	Liquid; steam; gas
Measured pressure range (min, max), MPa	-0,5..3
Supply voltage, V	10,5...45, for Exia and Exdia up to 28 V
Explosion protection	0Ex ia IIC T6...T4 Ga X, 1Ex d IIC T6...T4 Gb X, 1Ex d ia IIC T6...T4 Gb X 0Ex ia IIB T6...T4 Ga X
Accuracy, %	±0,04; 0,065; 0,1; 0,15; 0,2; 0,25; 0,5
Stability	Less than 0,1% within 5years (or 0,02% within 1 year)
Operation temperature, °С*	-90...+400
Ambient temperature for explosion-proof transmitters,°С	-50..+85
Ambient temperature (excluding explosion-proof transmitters), °С	-60...+85
Range Adjustment	100:1
Diaphragm material	Stainless steel 316L, Hastelloy HC-276, Tantalum, Monel, 316L gold-plated
Filling liquid	Silicon oil, Inert oil
Transmitter material	Aluminum, Aluminum with a protective layer, Stainless steel
Calibration interval	5 years
Software	Branded Software EMIS-Integrator
Ingress protection	(IP65, IP68)**
Output signals	4-20мА + HART with DD
Proccess connection	In-Line Mount, Traditional-mount, with Remote Diaphragm seal, with Remote Extended Diaphragm Seal